Tecnowatt uses different connection systems in order to suit the multiple types of products in its production.

Faston type connection

This connection system is constituted by a 6.3 mm steel Faston connection that is electrically welded to the ends of the resistances and inserted into the ceramic bushings, which are available in multiple models and vary in size and shape in order to suit the wide range of customer needs.

Glass-Silicon Unipolar Wire Connection

This connection system is constituted by a pair of insulated glass-silicone wires with a variable length depending on the customer’s needs. The elements produced with this type of connection are supplied with special ceramic bushings that make it possible to fasten them by means of clips.

Connection with clamp-Faston terminal and Clips

This connection system is constituted by a galvanized or nickel-plated iron clamp, perpendicular to the resistive element, which has a 6.3 mm type Faston connection on the terminal part. This type of connection is mainly used for heaters. The elements produced with this type of connection are supplied with Steatite insulating systems, in 5 different models as per the following table:

Supports for fastening drying hood resistances

These support systems are used for drying hood resistances in which the heating element must be mechanically supported for its entire length by the structure of the drying hood.
Tecnowatt can supply mica commutator bars with a thickness from 1mm to 2 mm equipped with galvanized iron squares, which make it possible to fasten them to the support structure by means of self-tapping screws.

The available models differ in the number of resistances supported, which vary from 1 to 3 elements.