Copyright © 2003-2016 Tecnowatt s.r.l.
P.IVA 00153470349

Home Page House Profile Contact Us Site Map

  Connection and Mounting
 

Home Page
Quartz-Glass Resistance
Steatite Resistance
Curling Irons Resist.
Stretch Iron Resist.
Grill Resistance
Drying Hoods Resistances
Aquarium Heating Resist.
Hot Dog Resistance
Germicidal Lamps
Connection and Mounting

Tecnowatt uses different connection systems in order to suit the multiple types of products in its production.

13190004.jpg (17207 byte)
Click on the picture to enlarge

Faston type connection

This connection system is constituted by a 6.3 mm steel Faston connection that is electrically welded to the ends of the resistances and inserted into the ceramic bushings, which are available in multiple models and vary in size and shape in order to suit the wide range of customer needs.

suppfast.jpg (28886 byte)
Click on the picture to enlarge

Glass-Silicon Unipolar Wire Connection

This connection system is constituted by a pair of insulated glass-silicone wires with a variable length depending on the customerís needs. The elements produced with this type of connection are supplied with special ceramic bushings that make it possible to fasten them by means of clips.

Connection with clamp-Faston terminal and Clips

This connection system is constituted by a galvanized or nickel-plated iron clamp, perpendicular to the resistive element, which has a 6.3 mm type Faston connection on the terminal part. This type of connection is mainly used for heaters. The elements produced with this type of connection are supplied with Steatite insulating systems, in 5 different models as per the following table:

Model ID
Insulator type SS  (no ID)
Insulator type S1 (ID=1)
Insulator type S2 (ID=2)
Insulator type S3   (ID=3)
Insulator type S4 (ID=4)
              
         

Supports for fastening drying hood resistances

These support systems are used for drying hood resistances in which the heating element must be mechanically supported for its entire length by the structure of the drying hood.
Tecnowatt can supply mica commutator bars with a thickness from 1mm to 2 mm equipped with galvanized iron squares, which make it possible to fasten them to the support structure by means of se
lf-tapping screws.

The available models differ in the number of resistances supported, which vary from 1 to 3 elements.

    

 
 

horizontal rule

 

Copyright © 2003-2017 Tecnowatt s.r.l. - Optimized for 1024 x 768 video  resolution
Developed by D.G. System s.a.s - Polesine P.se (PR) ITALY - www.dgsystem.it - Updated on: 03-22-2017